7L Manual & Pneumatic Oil Extractor - Multi-Purpose Fluid Transfer Pump

• Dual Operation Modes: Manual and pneumatic operation for versatile use in different circumstances.
• Wide Application Range: Suitable for extracting various fluids from vehicles, engines, and industrial machinery.
• Convenient Fluid Extraction: Easy-to-use design with a simple button push for quick and efficient suction.
• Multiple Suction Probes: Supplied with 4mm, 6mm, and 10mm suction probes for different extraction needs.
• Package Inclusions: Comes with all necessary components, including suction tubes, a brake tube, and a wire pipe.

Upgrade your fluid extraction tasks with the HORUSDY 7L Manual & Pneumatic Oil Extractor. This extractor offers the convenience of both manual and pneumatic operation, allowing you to use it with standard shop air or manually when compressor air is not available. It is suitable for extracting various fluids such as engine oil, gear oil, coolant fluid, power steering fluid, and brake fluid from cars, motorcycles, marine engines, stationary engines, and industrial machinery. Additionally, it can be used for low viscosity fluids like water, making it ideal for draining fish tanks, basins, and sinks. The extractor is easy to use, simply push the button to start the suction process. It comes with 4mm, 6mm, and 10mm suction probes to accommodate different applications. The package includes the 7L pneumatic and manual fluid extractor, suction tubes, a brake tube, and a wire pipe.

Pneumatic Operation Steps:

• Stick the extraction tube into the dipstick until the tube reaches the bottom of the oil pan, turn the air valve to open and then push the operating button. When the suction unit reaches full the extractor will automatically shut off leaving no spills or mess.

Manual Operation Steps:

• With the engine turned off, open the front cover of the car and pull out the dipstick.
• Adjust the upper locking clamp of the oil sucking pipe so that the length of the end of the oil pipe extending into the engine room is equal to the length of the dipstick.
• Insert the oil suction pipe into the oil dipstick hole and make sure that it touches the engine oil pan.
• Close the oil drain valve of the pumping unit.
• Press the vacuum suction handle 4-6 times to extract all the waste oil.

Package Includes:

1x 7L Pneumatic and Manual Fluid Extractor

1x 0.31inch Suction Tube

1x 0.21inch Suction Tube

1x 0.14inch Suction Tube

1x 0.14inch Brake Tube

1x Wire Pipe